Energy and buildings, Tập 126, Số 1, 2016

Mục lục:

1 cover
2 ENERGY AND BUILDINGS An international journal devoted to investigations of energy use and effi ciency in buildings
3 Corrigendum to “Thermal building modelling using Gaussian processes” [Energy Build. 119 (2016) 119–128]
4 Simulation and optimization study on a solar space heating system combined with a low temperature ASHP for single family rural residential houses in Beijing
5 Numerical analysis on the cooling performance of a ventilated Trombe wall combined with venetian blinds in an office building
6 Embodied energy of mud concrete block (MCB) versus brick and cement blocks
7 CO 2 emission reduction effects of an innovative composite precast concrete structure applied to heavy loaded and long span buildings
8 Theory and procedure for measuring the solar reflectance of urban prototypes
9 Simulation aided optimization of a historic window’s refurbishment
10 How to interpret the renewable share?
11 Modeling the long-term effect of climate change on building heat demand: Case study on a district level
12 Time series forecasting for building energy consumption using weighted Support Vector Regression with differential evolution optimization technique
13 A parametric analysis on the regeneration performance of silica gel in a proposed comfort provision strategy for a typical office space in Harare, Zimbabwe
14 Modified lime-cement plasters with enhanced thermal and hygric storage capacity for moderation of interior climate
15 Models and method for estimation and comparison of direct emissions in building construction in Australia and a case study
16 Electric energy storage design decision method for demand responsive buildings
17 The influence of single-sided ventilation towards the indoor thermal performance of high-rise residential building: A field study
18 Robust optimal design of chilled water systems in buildings with quantified uncertainty and reliability for minimized life-cycle cost
19 Preparation and characterization of high NIR reflective pigments based in ultramarine blue
20 Energy analysis of green office buildings in the tropics—Photovoltaic system
21 Genetic algorithm optimized impact assessment of optimally placed DGs and FACTS controller with different load models from minimum total real power loss viewpoint
22 Impact of the enthalpy function on the simulation of a building with phase change material wall
23 Producing a better performance for the under floor air distribution system in a dense occupancy space
24 Deep energy retrofit of the T. M. Plauto School in Italy—A five years experience
25 Energy consumption to cool and heat experimental modules for the energy refurbishment of fac¸ ades. Three case studies in
26 PV array fault DiagnosticTechnique for BIPV systems
27 Performance evaluation of aerogel-based and perlite-based prototyped insulations for internal thermal retrofitting: HMT model validation by monitoring at demo scale
28 Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher
29 Simulation on effects of subcooler on cooling performance of multi-split variable refrigerant flow systems with different lengths of refrigerant pipeline
30 Occupant centered lighting control: A user study on balancing comfort, acceptance, and energy consumption
31 A virtual thermostat for local temperature control
32 Experimental evaluation of urban heat island mitigation potential of retro-reflective pavement in urban canyons
33 An energy performance monitoring, analysis and modelling framework for NetZero Energy Homes (NZEHs)
34 Energy management in public institutional and educational buildings: The case of the school of engineering and architecture in Bologna
35 Theoretical overview of heating power and necessary heating supply temperatures in typical Danish single-family houses from the 1900s
36 Decentralized thermal modeling of multi-zone buildings for control applications and investigation of submodeling error propagation
37 Estimating detailed optical properties of window shades from basic available data and modeling implications on daylighting and visual comfort
38 Research on temperature dependent effective thermal conductivity of composite-phase change materials (PCMs) wall based on steady-state method in a thermal chamber
39 Using synthetic population data for prospective modeling of occupant behavior during design
40 MATRIX, a multi activity test-room for evaluating the energy performances of ‘building/HVAC’ systems in Mediterranean climate: Experimental set-up and CFD/BPS numerical modeling
41 Empirical model for predicting the dehumidification effectiveness of a liquid desiccant system
42 Domestic electricity load modelling by multiple Gaussian functions
43 On-site assessment of the discharge coefficient of open windows
44 Evaluating the reliability of multi-energy source buildings: A new analytical method for considering the dynamic behavior of thermal loads
Tìm nhanh