Construction and Building Materials, Tập 106, Số 1, 2016

Mục lục:

1 cover
2 Construction and Building MATERIALS
3 A review on dynamic mechanical properties of natural fibre reinforced polymer composites
4 The sustainability of the materials under the approach of ISMAS
5 Physical and chemical characteristics of fly ash using automated scanning electron microscopy
6 Investigation on the pavement performance of asphalt mixture based on predicted dynamic modulus
7 Time-resolved in situ investigation of Portland cement hydration influenced by chemical admixtures
8 Low elastic modulus and expansive well cement system: The application of gypsum microsphere
9 Fresh behavior of mortar based on recycled sand – Influence of moisture condition
10 Durability properties of lightweight self-consolidating concrete developed with three types of aggregates
11 Modelling the fresh properties of self-compacting concrete using support vector machine approach
12 Theoretical and experimental study on mechanical properties and flexural strength of fly ash-geopolymer concrete
13 Strain and shear stress fields analysis by means of Digital Image Correlation on CFRP to brick bonded joints fastened by fiber anchors
14 Behavior of high-performance fiber-reinforced cement composite columns subjected to horizontal biaxial and axial loads
15 Investigation of the effects of graphene and graphene oxide nanoplatelets on the micro- and macro-properties of cementitious materials
16 Effects of adding nano-TiO 2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer paste
17 Bio-mineralization on cement-based materials consuming CO 2 from atmosphere
18 An extensive laboratory investigation of the use of bio-oil modified bitumen in road construction
19 Using copula method for pipe data analysis
20 Assessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends
21 Modeling of fracture parameters for crack propagation in recycled aggregate concrete
22 The influence of natural reinforcement fibers, gypsum and cement on compressive strength of earth bricks materials
23 Analytical solution for interaction forces in beams strengthened with near-surface mounted round bars
24 Fatigue behavior of corroded prestressed concrete beams
25 Effectiveness of tetra-ethyl-ortho-silicate (TEOS) consolidation of fired-clay bricks manufactured with different calcination temperatures
26 Laboratory performance of warm mix asphalt binder containing polyphosphoric acid
27 High strength mortars using ordinary Portland cement–fly ash–fluid catalytic cracking catalyst residue ternary system (OPC/FA/FCC)
28 Self-cleaning performance of TiO 2 -coating cement materials prepared based on solidification/stabilization of electrolytic manganese residue
29 A study on fatigue modeling of hot mix asphalt mixtures based on the viscoelastic continuum damage properties of asphalt binder
30 Durability of concrete made by partial replacement of fine aggregate by colemanite and barite and cement by ashes of corn stalk, wheat straw and sunflower stalk ashes
31 Effects of parent concrete and mixing method on the resistance to freezing and thawing of air-entrained recycled aggregate concrete
32 Influence of agricultural residue ash on early cement hydration and chemical admixtures adsorption
33 Evaluation of different short term aging procedures with neat, warm and modified binders
34 Rheological studies of asphalt modified with elastomeric polymer
35 Sulphate effect on the early age strength and self-desiccation of cemented paste backfill
36 Evaluation of crumb rubber as aggregate for automated manufacturing of rubberized long hollow blocks and bricks
37 Experimental investigation and mechanism analysis of novel multi-self-healing behaviors of bitumen using microcapsules containing rejuvenator
38 The possibility of using dredging sludge in manufacturing cements: Optimization of heat treatment cycle and ratio replacement
39 Sodium sulfate and alternative combined sulfate/chloride action on ordinary and self-consolidating PLC-based concretes
40 Physical and rheological properties of asphalt modified with SEBS/montmorillonite nanocomposite
41 The use of steelmaking slags and fly ash in structural mortars
42 Shear behavior of recycled aggregate concrete after exposure to high temperatures
43 Rutting performance of rubberized porous asphalt using Finite Element Method (FEM)
44 Influence of surface finish and composition on the deterioration of building stones exposed to acid atmospheres
45 Pervious concrete fill in Pearl-Chain Bridges: Using small-scale results in full-scale implementation
46 Effect of the combination of fly ash and silica fume on water resistance of Magnesium–Potassium Phosphate Cement
47 Influence of the type of pre-calcined asbestos containing wastes on the properties of sintered ceramics
48 Pavement interface damage behavior in tension monotonic loading
49 Weather aging resistance of different rubber modified asphalts
50 Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars
51 Influence of bacteria on compressive strength and permeation properties of concrete made with cement baghouse filter dust
52 Textile-reinforced rammed earth: Experimental characterisation of flexural strength and thoughness
53 Prediction of the mechanical properties of structural recycled concrete using multivariable regression and genetic programming
54 The effect of different Na 2 O and K 2 O ratios of alkali activator on compressive strength of fly ash based-geopolymer
55 Effect of internal curing with super absorbent polymers on autogenous shrinkage of concrete at early age
56 Experimental analysis of temperature gradients in concrete box-girders
Tìm nhanh